Insurance Group Says Car Design Hinders Use of Child Safety Seats


My family has spent much frustrating time trying to hook child safety seats into various cars. We’ve never found a safety seat and a vehicle that make a good combination for an easy installation. So a recent article in the Los Angeles Times came as no surprise to me. The gist of the article is that vehicle manufacturers have not done enough to make it easier to install child safety seats, even in newer vehicles. Here are excerpts:

Child safety seats are difficult to properly install in cars, according to an insurance industry research group, because of the design of most passenger seats.

Joint research conducted by the Insurance Institute for Highway Safety and the University of Michigan Transportation Research Institute found that just 21 of 98 top-selling 2010 and 2011 model year vehicles have seat designs that are easy to use with child restraints.

The low percentage was notable, considering that the auto industry is using a system called Lower Anchors and Tethers for Children — or Latch — that was intended to make it easier to install the safety seats.

The problem, according to the insurance trade group, is that the manufacturers haven’t paid enough attention to how the Latch system works when designing passenger seats.

“Installing a child restraint isn’t always as simple as a couple of clicks and you’re done,” said Anne McCartt, the insurance institute’s senior vice president for research and one of the report’s authors. “Sometimes parents blame themselves when they struggle with Latch, but oftentimes the problem lies with the vehicle, not the user.”

The vehicles were tested by 36 volunteers, each of whom was asked to install three styles of child restraints in three vehicles. All the participants use child seats in their own vehicles. If they had questions about how to install the seats, they could consult owners’ manuals but received no other assistance.

Only 13% of the volunteers installed seats with lower anchors and top tethers to get a tight, secure fit at the right angle, according to the insurance group.

The researchers found that the lower anchors used to attach the restraint systems were often set too deep in the seats to be easily accessible. Lower anchors — metal tabs that are used to secure the child seat to the vehicle — were visible in just 36 of the 98 study vehicles. Researchers also found that seat belt buckles, bolstering and other upholstery features hindered proper securing of the restraint system.

Finally, the designs of the passenger seats sometimes required those installing the restraints to make too big an effort — judged as using more than 40 pounds of force — to properly attach child seat hardware to the lower anchors.

1 Comment For This Post

  1. Ron Miller
    April 25th, 2012 | 2:08 pm

    I can’t get too mad about this. They are a hassle but you can do it. I don’t think it is ultimately a safety issue. You know if the child is secure.

    If consumers want cars that are easier for car seats, they should demand it in their buying preferences.

Leave a Reply

Trackback URL

http://www.pissd.com/2012/04/insurance-group-says-car-design-hinders-use-of-child-safety-seats/trackback/